Most Singapore ceilings run 2.7-2.9m, so a standard wardrobe sg height of 200-220cm leaves a 50-70cm gap above. Filling the gap with a separate topper adds storage but increases the crated height above 240cm, which fails many HDB lifts. A 200cm carcase with a 30cm leg block underneath clears the lift and stays easy to clean. For condo owners, taller 240cm pieces fit within service lift allowances.
A two-door solid wood wardrobe sg from MIDHILL's Foshan workshop starts around US$1,400 landed, with three-door walnut versions reaching US$2,800. Shipping is free over US$350, and GST is paid on the CIF value at 9%. For a 200cm teak three-door, expect all-in landed pricing near S$3,200 including duty and GST, depending on the declared wood species and lacquer system chosen at the showroom.
Avoid silicone polishes, abrasive creams, high-pH degreasers, and standing water on wardrobe sg edges — these cause 80% of warranty claims. Use a soft microfibre cloth lightly dampened with water, then dry. The written cleaning instruction shipped with each MIDHILL order lists approved pH-neutral soap at 5ml per litre. Never spray directly onto handles or hinges, and never place a wardrobe sg near a steamer or kettle point.
Horizontal wardrobe sg surfaces (top panels, shelves) often use a different lacquer system than vertical faces to resist wear — usually cross-linked polyurethane on tops and nitrocellulose on sides. Hand-rubbed gloss is a sequence, progressively finer abrasives, then paste on a felt block, then buff, then remove swirl marks. So two pieces in the same line may differ because of grain orientation, not quality. Ask MIDHILL for batch records and photos.
MIDHILL operates the Lecong showroom in Foshan by appointment only — Singapore buyers typically fly in via direct flights from Changi, taking about 4 hours. Two working days evaluates a shortlist, and five days reaches a specific wardrobe sg specification. Bring your HDB or condo dimension schedule: room width, ceiling height, lift door size, and corridor turns. Buyers who arrive with measurements leave with a clear spec and quote.
Before confirming any wardrobe sg order, verify five things. First, panel dimensions against your lift and corridor turn in cm. Second, declared wood species and kiln-dry moisture content. Third, the lacquer system — cross-linked polyurethane for tops, nitrocellulose for verticals. Fourth, crate weight per piece below 70kg for HDB delivery. Fifth, batch inspection photos dated within 30 days of shipment. MIDHILL provides all five as standard documentation.